Why do we need shock absorbers?
The simplest method to increase productivity is to raise machine operation speed. It often accompanies with excessive vibration and noise, damage to machines and products and decreasing in machine life. Most important of all, safety has to be sacrificed to a certain degree because of large shock forces generated.
MAXYNE shock absorbers are developed to provide linear deceleration and therefore solve these problems. They can stop or change direction of moving objects smoothly  and quietly without any compromising in safety. MAXYNE shock absorbers are ideal for energy absorption and are being used whenever shock forces occur. 
 
The advantages of using shock absorbers include
1. To increase production rate.
2. To extend machine life.
3. To simplify equipment design.
4. To reduce maintenance cost.
5. To reduce vibration and noise levels. 
 
Functions of hydraulic shock absorbers
1. Eliminating vibration and absorbing striking energy in a short time.
2. Reducing operating noise and offering a quiet working environment.
3. Accelerating machine operation and elevating production capacity.
4. Extending machine life time and reducing after sale service.
5. Improving quailty of products. 
 
Applications
Robots for plastic injection moulding machine, pick and place robots, feeding equipment, screen print machines, conveyors, air cylinders, vibration conveyor systems, rolling doors, medical equipment, foundry industries, rodless cylinders, package machines, machine tools, rubber/ plastic machines, woodworking machines, aircraft industries, military equipment, education researches and automotive transfer lines.
 

Robot Absorber AC 2030
Robot Absorber AC 2030
ACD 2050-2W
ACD 2050-2W
ACD 2050
ACD 2050
ACD 2030
ACD 2030

pneumatic gripper is a specific type of pneumatic actuator that typically involves either parallel or angular motion of surfaces, the gripper can be used as part of a ''pick and place'' system that will allow a component to be picked up and placed elsewhere during the manufacturing process.

Some grippers act directly on the object they are gripping based on the force of the air pressure supplied to the gripper, while others will use a mechanism such as a gear or toggle to leverage the amount of force applied to the object being gripped. Grippers can also vary in terms of the opening size, the amount of force that can be applied, and the shape of the gripping surfaces—frequently called ''tooling jaws or fingers''. They can be used to pick up everything from very small items (a transistor or chip for a circuit board, for example) to very large items, such as an engine block for a car. Grippers are frequently added to industrial robots in order to allow the robot to interact with other objects.

Mini Gripper MYG-CHK-ES-08-C
Mini Gripper MYG-CHK-ES-08-C
Mini Gripper MYG-CHK-EX1-20-C
Mini Gripper MYG-CHK-EX1-20-C
Mini Gripper MYG-CHK-EM-12-C
Mini Gripper MYG-CHK-EM-12-C
Mini Gripper - MYG-MINI-1060-M10-S
Mini Gripper - MYG-MINI-1060-M10-S
A wide range of LADUNG cutting tools has been highly regarded and used by all industries and automation around the world. LADUNG air power cutters are leaders in cutting, crimping, bending, pressing, and punching in all the top manufacturing environments. Our handheld cutting tools satisfy our customers and are manufactured with highest of quality standards.
Auto Nipper Cut - MS20
Auto Nipper Cut - MS20
Handheld Air Cutter - MR20
Handheld Air Cutter - MR20
F5. Standard Plastic Cutting Blade
F5. Standard Plastic Cutting Blade
LADUNG AIR NIPPER MODEL F9AE
LADUNG AIR NIPPER MODEL F9AE
Design Service 
All our engineers are well trained and have many experience in the construction of aluminium profile systems.
We are able to meet our customers specific application demands through the use of our in house CAD support service. 
 
Cut To Length Service
We provide our customers with a Cut Down service to satisfy specific length requirements.
The advantages are the cross-section ends are burr free and do not need to be reworked.  
 
In House and On Site Assembly Service
With our experienced and trained technicians, and our fully equipped workshop on site,
we are able to assemble effiently to meet our customers high quality requirements. 
Gusset Element 40X40
Gusset Element 40X40
Gusset Element 30X30
Gusset Element 30X30
Gusset Element 20X20
Gusset Element 20X20
Internal Bracket 45X45
Internal Bracket 45X45
MAXYNE Automatic Screw Feeder designed for speed, stability and convenience. Improving screw driving speed and work efficiency by integrating pneumatic / electrical screwdriver / servo nut runner, high-tech automatic feeder and high precision jaw. The jaw is customized by particular screw and working environment to provide a stable operation. 
Reduce of working time and man power at least 30~50%.
MYCBD-618, Handheld Screw Feeding System
MYCBD-618, Handheld Screw Feeding System

Conveyor 

A conveyor system is a frequently used piece of mechanized handling equipment that transfers material from one place to another. A conveyor system is extremely useful in moving large and heavy materials from one location to another. Conveyor systems are popular and widely used in the material handling and packaging industries because they are quick and efficient in transporting a variety of materials. There are many kinds of conveyors available and therefore, different conveyors are used by different industries for different purposes. Conveyors are regularly used by many industries including the chemical, agricultural, electronic, aerospace, computer, food processing, pharmaceutical, print finishing and packaging, bottling and canning and the automotive industry. 

An automated system is a conveyor system that transports materials to different places and operates without human intervention. Automated systems are usually designed and manufactured for products of different weights, shapes and sizes. These systems can operate independently and can also work with other equipments. The automated system provides certain benefits:
  • The automated system provides total product handling and is automated
  • Each automated conveyor system is designed according to specific needs and requirements
  • There are a large variety of automated systems especially designed for the requirements of the customer
  • Automated systems are available in painted, mild, and stainless steel
A food conveyor is type of conveyor system where food is moved from one location to another. Such food includes bakery, seafood, confectionery, poultry, RTE (ready-to-eat) food, diary and meat. A certain series of food conveyors include plastic chain, welded stainless steel and belt food processing conveyors. The AquaPruf Series of food conveyors are designed for effective and speedy sanitation. It has both, curve and straight sections. It also has other features such as tip up nails, center drives, options for nose bar and several other benefits. 

A belt conveyor is a type of conveyor system, which has two or more pulleys, and rotates above a continuous loop of material to transport materials from one place to another. Both or one of the pulleys is powered. The pulley which is powered is known as the drive pulley while the pulley which is not powered is known as the idler. Belt conveyors may be classified into two main industrial classes namely, material handling and bulk material handling. Material handling includes general transportation of boxes within a factory and bulk material handling includes transportation of agricultural and industrial products to outdoor places, such as coal, grain, ores, etc. 

A roller conveyor is a type of conveyor system where materials and products can be conveyed, moved and accumulated for transport and handling purposes with the help of rollers. Roller conveyors can have diameters ranging from 16 mm to 190 mm and lengths ranging from 70 mm to 3500 mm. Roller conveyors are made of high quality materials and can also have other features such as seals, roller bearings and housings. Roller conveyors are mainly used by the food-processing industry, for document and postal handling, luggage handling and cargo handling. 

A chain conveyor is a type of conveyor system that utilises a constant chain arrangement which is powered to carry a succession of single pendants. A motor is used to power the chain arrangement and the materials balanced on the pendants are conveyed. The chain conveyor equipment is highly popular and used by many industry sectors in their production process. The chain conveyor is commonly used by the automotive industry to convey parts of the car through paint plants. The chain conveyor is also used in other industrial sectors such as the brown and white goods, metal finishing and other industries for distribution. 

A screw conveyor is a type of conveyor system which is known for its material handling mechanism. It is widely used by industries handling bulk materials. In the modern industry, screw conveyors are commonly used in the horizontal position or at a slight incline to increase efficiency in moving semi-solid materials such as animal feed, food waste, meat and bone meal, wood chips, boiler ash, municipal solid waste, aggregates and many others. A screw conveyor can have a bigger pitch spacing which results in higher capacity with no increase in the speed of rotation.
myFlexiCONVEY - Expandable / Flexible Conveyor
myFlexiCONVEY - Expandable / Flexible Conveyor
myCONVEY Standard Conveyor
myCONVEY Standard Conveyor
They are designed for lifting and/or transporting loads short distances around the production line/warehouse. Because these portable counterbalanced cranes are movable, they are more flexible than permanently fixed cranes due to their mobility. There are many important things to remember regarding portable counterbalanced cranes so be sure to read, understand and adhere to the owner's manual. 
Movable Counter Balanced Floor Crane EPFC-25
Movable Counter Balanced Floor Crane EPFC-25
Rotating Floor Crane EPSC900R
Rotating Floor Crane EPSC900R
Electric Floor Crane Counter balance - ZX-400-A/B
Electric Floor Crane Counter balance - ZX-400-A/B
Expansion gripper are used to grip parts by expanding in a hole (ID-GRIPPER). They are inexpensive, light weight and are tested to last 2 million cycles. A fine air filter FSL is recommended. 
ID expansion grippers series MFD/MFU
ID expansion grippers series MFD/MFU
A Complete Solutions Of EOAT Gripper Cylinder with 5, 10, 20, 30mm stroke ...
Gripper Plate. GP-1210WD With Plate With Switch.
Gripper Plate. GP-1210WD With Plate With Switch.
Gripper Plate. GP-1210PT With Plate.
Gripper Plate. GP-1210PT With Plate.
Gripper Cylinder PT-1840.
Gripper Cylinder PT-1840.
Gripper Cylinder PT-1815.
Gripper Cylinder PT-1815.
All Sizes Of Gripper Plates, Can Find in formyrobot.com 
Gripper Plate. GP-3050PT-V. V Shape
Gripper Plate. GP-3050PT-V. V Shape
Gripper Plate. GP-3050PT-V With Switch. V Shape
Gripper Plate. GP-3050PT-V With Switch. V Shape
Gripper Plate. GP-3050WD With Switch. White Colour.
Gripper Plate. GP-3050WD With Switch. White Colour.
Gripper Plate. GP-3050PT. White Colour.
Gripper Plate. GP-3050PT. White Colour.
1 Mainly be used for storage of moulds. 
2 Slide in and out. 
3  loading capacity can be 800-3000 KGS per layer. 
4 Easy to assemble and disassemble. 
5 Surface treatment: Powder coated. 
6 Different style, size and color are available.
 
We hold expertise in offering our clients a comprehensive range of Racks. These Mold Racks are fabricated using finest quality factor inputs. Our range is appreciated by our clients as these can be used for the storage of heavy goods such as tools, molds and motors.

Injection Mold  Die Storage Racks features:
 
1, Drawer side easy to handle and spaces adjustable at ease. 
2, Provided with pulley and manual chain block for easy handling. 
3, Unified size and varied matches for connection at any place. 
4, Assembly-type components for easy assembly and disassembly. 
5, Each mould shelces can hold several moulds, easy to maintain, manage and identify moulds within min. Space. 
6.Drawer racking, it is used for storing the moulds, the customed sizes are available.
 
 
Suitable for storing different kinds of mould with each veneer separately drawable and height of each layer adjustable, saving storage and operation space. Equipped with transfer car on the top and limiting set to assure lifting easily and safety. Four roller are installed under the drawer to make the removing easily.

3 Poles Heavy Duty Industry Mold Rack
3 Poles Heavy Duty Industry Mold Rack
2 Poles Light Duty Industry Mold Rack
2 Poles Light Duty Industry Mold Rack
LED magnifier is a lightweight magnifier with an all­metal construction, LED light sources, and a flexible spring­balanced arm. The arm provides long reach and maximum vertical and horizontal movement, and will always stay in the right position without drifting. The flexibility of the joint between lamp head and arm makes exact positioning easy. 

LFM LED is equally well suited for professional use as for use by the visually impaired and others with a need for precise magnification. The light weight makes it easy to move around. It's easily mounted with a removable table edge clamp. 
Shadow­free magnification The glass lens is positioned in the middle of a circle of LED light sources. This is the ideal way of illuminating an object, virtually eliminating shadows.

The LED Magnifier equipped with a full circle of light emitting diodes (LED) with a total energy consumption of only 9,5W. LEDs have an incredibly long life span. The diodes have a life expectancy of 50.000 hours. That means 25 years or more with normal use. You will never have to change the light source! About magnification Follow this link to read more about the principles of magnification, and how a LED magnifier can make a difference for people in many different fields of life.
LED Magnifier -myLM-86A
LED Magnifier -myLM-86A
Maxyne Robot Series provive a high qualities basic pick and place robot like mySWING, myBASIC series and also myADVANCE which providing high qualities freely programmable high tech with fast cycle robotic arm.
mySWING-850TS. Telescopic Single Arm
mySWING-850TS. Telescopic Single Arm
mySWING-750D. Double Arm.
mySWING-750D. Double Arm.
mySWING-750S. Single Arm
mySWING-750S. Single Arm
mySWING-650D. Double Arm
mySWING-650D. Double Arm
Pneumatic fittings provide the essential link between tubes, hoses and other components in a pneumatic system. ... In addition to connecting pneumatic components and stopping the flow of unused ports, miniature fittings are also used to control air flow pressure and directional flow.
POC Type
POC Type
PMF Type
PMF Type
PCF Type
PCF Type
PL Type
PL Type
Pneumatic Manifold

Pneumatic manifolds provide a convenient junction point for the distribution of fluids or gases and are used to provide pneumatic power to two or more locations to supply multiple tools. Simply thread 
pneumatic fittings into the ports of the distribution block to produce an organized method of supplying multiple lines from a single source. Air manifolds come in various port options and different material types for low and high-pressure applications.

Pneumatic Manifold Advantages

  • 2 to 10 station air manifolds
  • Variety of sizes & configurations
  • Aluminum, brass, stainless steel, polypropylene & nylon materials
  • Aluminum pneumatic manifolds are black anodized for corrosion resistance
  • Precision machined
my-MF8
my-MF8
my-MF6
my-MF6
my-MF4
my-MF4
formyrobot offers many series of panel mount power supplies for different needs. For example, the innovative series with corrosion resistant aluminium body and the affordable series with specifications bigger than its price tag.

If the brand or model that you are looking for is not in our list. Kindly contact us for more details information.

MEAN WELL LRS-150F SINGLE OUTPUT SWITCHING POWER SUPPLY
MEAN WELL LRS-150F SINGLE OUTPUT SWITCHING POWER SUPPLY
MEAN WELL LRS 100 SINGLE OUTPUT S100W ROBOT & AUTOMATION POWER SUPPLY
MEAN WELL LRS 100 SINGLE OUTPUT S100W ROBOT & AUTOMATION POWER SUPPLY
MEAN WELL RT50 TRIPLE OUTPUT 50W ROBOT & AUTOMATION POWER SUPPLY
MEAN WELL RT50 TRIPLE OUTPUT 50W ROBOT & AUTOMATION POWER SUPPLY
MEAN WELL RD-35 DUAL OUTPUT 35W ROBOT & AUTOMATION POWER SUPPLY
MEAN WELL RD-35 DUAL OUTPUT 35W ROBOT & AUTOMATION POWER SUPPLY
YUSHIN Robot Handheld Pendant - AT series G Controller
YUSHIN Robot Handheld Pendant - AT series G Controller
STAR Robot Console - STAR - STEC S1
STAR Robot Console - STAR - STEC S1
HARMO Robot Console - HRS - 500
HARMO Robot Console - HRS - 500
STAR Swing Robot Console - STAR - STEC FA2
STAR Swing Robot Console - STAR - STEC FA2

End of arm tooling (EOAT) is a crucial aspect of robotic technology. It refers to the equipment that interacts with parts and components, typically at the end of a robotic arm. For example, the welding torch on a robotic welding system, Pick and place application, Insert application, IML & IMD application or 2 colours molding application..

The EOAT gives a robot a specific functionality and can be changed to fit different applications or even be built to accommodate several processes at once. Either way, advancements in EOAT capabilities are parallel to advancements in robotic capabilities.

There are many different types of EOAT for robots: grippers, Suction, cutting, parts removing,tool changers and more. They’re powered electrically, mechanically or pneumatically. The application dictates which type of EOAT is needed.

Currently, and in the near future, pneumatic EOATs have proven to be the most popular, since they’re easy to integrate and pack a lot of power in a small package. Grippers are also a popular EOAT for robots, as pick and place applications are prime targets for automation and the gripping capabilities of robots has advanced significantly in recent years.

EOAT is an important part of a robotic system. It’s what gives a robot its functionality, and as EOAT advances, so does robotics.

Aluminium Long Slide Block (M4). MYZ-MX005
Aluminium Long Slide Block (M4). MYZ-MX005
Aluminium Profile Long Slide Block (M5). MYZ-MX006
Aluminium Profile Long Slide Block (M5). MYZ-MX006
Aluminium Profile Short Slide Block Nut (M5) MYZ-MX007
Aluminium Profile Short Slide Block Nut (M5) MYZ-MX007
Aluminium Profile Link Block. MYZ-MX001
Aluminium Profile Link Block. MYZ-MX001
Robot Runner Chuck For Yushin, Harmo, Star, Wittmann...
YUSHIN Runner Chuck 1815S-L
YUSHIN Runner Chuck 1815S-L
YUSHIN Runner Chuck 1815S1
YUSHIN Runner Chuck 1815S1
YUSHIN Runner Chuck 1815S-L
YUSHIN Runner Chuck 1815S-L
YUSHIN Runner Chuck 1815S
YUSHIN Runner Chuck 1815S
We supply all kind suction cup single layer, double layer, triper layer from Harmo, Yushin, Star, EINS...
HM3-25. (HM Type 25mm Triple Layer)
HM3-25. (HM Type 25mm Triple Layer)
HM3-20. (HM Type 20mm Triple Layer)
HM3-20. (HM Type 20mm Triple Layer)
HM3-15. (HM Type 15mm Triple Layer)
HM3-15. (HM Type 15mm Triple Layer)
HM3-12. (HM Type 12mm Triple Layer)
HM3-12. (HM Type 12mm Triple Layer)
We Supply All Kind Of Suction Cup Holder Such As Yushin, Harmo, Star, EINS, Mini Type...
Magnetic Suction Holder (HM Type)
Magnetic Suction Holder (HM Type)
Magnetic Suction Holder (MX Type)
Magnetic Suction Holder (MX Type)
MM Suction Cup Holder - Mini Type 61mm Length
MM Suction Cup Holder - Mini Type 61mm Length
MM Suction Cup Holder - Mini Type 44mm Length
MM Suction Cup Holder - Mini Type 44mm Length
Switch To Desktop Version